Engine oil is one of the main needs of any car for proper performance. The car engine is like its beating heart and neglecting it will cause many irreparable damages to your car.

What is engine oil?

They are complex compounds consisting of base oil and various additives. Every car needs the right engine oil to function properly. In fact, engine oil is an essential element for the car engine. As the age of the engine increases, the importance of using high-quality oil is felt more and more.

In general, motor oils, sometimes called lubricants, are a group of oils that are used to reduce friction, heat, and wear between the mechanical components of the engine that are in contact with each other.

Having a healthy engine with a longer life requires feeding the engine with a suitable engine oil. Failure to use the right oil will damage the car’s engine parts and eventually cause serious damage to the engine. Since replacing engine parts is very difficult and involves a lot of costs, it is better to use the right engine oil so as not to incur additional and staggering costs for repairing or replacing the car’s engine.

What is the function of engine oil?

The main job of oil in a car engine is to lubricate and minimize friction between engine components. Of course, motor oil has other very important functions in the car engine. Preventing rust and corrosion of the engine, cleaning the engine and suspending the materials resulting from the wear of the parts, sealing the engine, protecting the metal surfaces of the engine, increasing the efficiency of the engine and some other features, are all the duties of the engine oil.

However, note that not all oils perform these tasks. If the oil you use is not suitable for your car engine, besides it will not be beneficial for your engine, it may also cause problems in the engine’s performance.

What is engine oil and what are its functions?

It is one of the derivatives of oil and an essential substance to protect the car engine. As you know, a car engine is a mechanical system in which a moving piston moves around a metal casing. As a result of this displacement, there is contact and wear between the metal parts of the engine, which causes damage to the parts over time. In order to minimize this wear and friction and prevent its damage, it is necessary to use lubricant inside the engine. This lubricant is called engine oil.
In addition to reducing friction and preventing piston and cylinder damage, engine oil also helps to cool the engine. Since the combustion process inside the engine is associated with heat generation and temperature increase, the cooling role of engine oil reduces the damage caused by temperature increase to the engine components.

In general, the functions of car engine oil can be summarized as follows:

Reducing friction and wear between metal components inside the engine
Cooling the engine and preventing damage to the engine components due to the increase in temperature
Cleaning the engine from soot and other waste products caused by combustion
Preventing oxidation and rusting of internal engine components
Preventing the formation of sludge in the engine compartment
Reduction of knocks caused by combustion in the car engine
According to the above explanation, it is clear that engine oil plays a vital role in the car. On the other hand, each engine, according to its characteristics, needs engine oil with different quality and specifications.

Familiarity with types of car engine oil

In general, engine oil for all types of cars is produced from petroleum derivatives. But the basic material for oil production and its chemical structure will vary. This issue is one of the factors affecting the quality and performance of engine oils. The better the chemical structure is modified and the more oil impurities are removed in the production process, the better the engine oil will be. The engine oil base is known as an effective factor on the life of the oils and their working time in the engine.

Synthetic or fully synthetic engine oil

Synthetic oil (Full Synthetic) is the best type of engine oil in terms of chemical structure. All impurities are removed in the production process of this oil and the chemical structure of the oil is modified in such a way that it has the best lubrication and the most resistance. Due to the high production technology, synthetic oils are more expensive than other oils and are usually used in luxury cars from different brands such as Benz, Toyota, Kia and Hyundai. Other advantages of synthetic engine oil include being non-corrosive and non-toxic, reducing oil consumption due to longer life, low evaporation, high burning temperature, high oxidation resistance, naturally having a high viscosity index, reducing fuel consumption up to 2.4 percent and low melting point.

Semi-synthetic engine oil

Semi synthetic oil is a combination of mineral and synthetic oils. The chemical structure of this oil has been well modified according to the production process so that the oil is at a suitable level in terms of performance. Although synthetic oils have a higher level of quality and performance than semi-synthetic oils, the use of synthetic oils in many cars is not economically viable. For example, the best choice for Tiba engine oil or Saina engine oil is semi-synthetic oils, and using fully synthetic oils in these cars only increases costs. Of course, the price of semi-synthetic oil is higher than mineral engine oil and its life is longer.

Mineral engine oil

The basis of mineral or mineral motor oil is crude oil and practically no modification of the chemical structure takes place in its manufacturing process. This engine oil is usually used in classic and old cars. Mineral oils are the cheapest type of oil and due to the production process, they have a shorter life in the engine.
Keep in mind that if your car’s engine oil is semi-synthetic, you should never use mineral oil for your car. Also, if full synthetic engine oil is suitable for your car, you should never use mineral or semi-synthetic oils.

Flushing

The flushing fluid is 0W-20 grade oils and is almost like water. This liquid is used to clean the engine in hybrid and modern cars. Therefore, this type of engine oil cannot be called a lubricant. In fact, this oil is used in a process called flash and after the oil in the engine is completely drained, it is used to completely clean the sediments and pollution inside the engine.

Is it possible to use a combination of several engine oils?

Note that you should never mix engine oils together. Since the way each engine oil is made and works is different, mixing them together will damage your car engine and make it difficult to function properly. To have the best performance in the engine, it is better to use the right oil for your car.

How does engine oil protect the car engine?

As we mentioned, the right engine oil is responsible for protecting the car engine and it does this by using different methods. In addition to preventing the accumulation of thick sludge in the car engine, oils clean the pollution and particles caused by sediments from the surface of the engine and in this way prevent the car engine from closing.

Also, using the right oil takes the heat created in some parts of the engine, such as the piston ring, whose temperature reaches 600 degrees Fahrenheit, and prevents the engine from overheating.

Some of the ways that engine oil protects the car engine are:

By cleaning the car engine
Through heat removal and increasing engine efficiency
By preventing car engine corrosion and rust
By reducing friction and reducing wear

Oskar Trading Company is a supplier of the following products:

Oil products:

LPG:

Liquefied petroleum gas or LPG (in English: Liquefied Petroleum Gas) refers to two hydrocarbon gases, butane and propane,

or their combination,

which are

kept in a liquid state. Usually, small amounts of compounds such as propylene and butylene are also present in liquid gas. LPG is

mostly used for heating applications and as fuel for vehicles. It is

also used in the manufacture of sprinklers and as a cooling gas in cooling devices such as refrigerators and freezers.

sulfur:

(in English: Sulfur) is

placed in the periodic table on the left side of chlorine, below oxygen and above selenium, and its chemical symbol is

S and its atomic number is 16. The discovery of this element goes back to prehistoric times. Therefore

It is a smelly, foul-tasting and polyvalent non-metal that is mostly available in the form of yellow crystals. Flea killer is useful for fertilizer and agriculture. This element is

primarily used in fertilizers; But it is

also widely used in gunpowder, softeners, matches and insecticides.

oil:

What is engine oil?

They are complex compounds consisting of base oil and various additives. Every car needs the right engine oil to function properly. In fact, engine oil is an essential element for the car engine. As the age of the engine increases, the importance of using high-quality oil is

felt more and more.

What is base oil?

It is

called an oil and is

considered as a base for lubricants. After adding additives to the base oil, the final lubricant is

obtained. Base oils are the most important components of lubricants in terms of volume, and in terms of weight, on average, they make up more than 95% of the formulation of a lubricant.

Light oil

Petrochemical:

Methanol:

Methanol or methyl alcohol, which is the simplest type of alcohol, is

known by the chemical formula CH3OH. Therefore

It is a light, volatile, colorless and flammable liquid. This substance is very toxic so that swallowing or inhaling it can cause blindness or death. Methanol is

used in the production of many final products such as solvents, paints, plastics and antifreeze.

Also, methanol is

used in a limited way as fuel in engines with internal combustion system. It should be

mentioned that most of the methanol produced in the world is

used to produce acetic acid and MTBE formaldehydes.

urea:

It is an organic compound with the chemical formula 2CO(NH2). This compound is colorless, odorless and relatively non-toxic and has high solubility in water. Urea is

widely used in chemical fertilizers as a rich and suitable source of nitrogen.

In fact, more than 90% of urea production in the world contains nitrogen for use as chemical fertilizers. Therefore
In general applications, urea has the highest amount of nitrogen among all solid nitrogenous fertilizers. Therefore

Based on this, urea brings the lowest transportation costs per unit of nitrogen feed.

Ammonia:

Ammonia, as an inorganic and colorless substance, is very irritating with a pungent and suffocating smell, and its usual form is liquid.

The production of various chemicals such as nitric and their use in various industries is one of its applications.

It is

also important to know that ammonia is

part of the nitrogen cycle and is

produced by bacterial processes in the soil. Ammonia is

also produced naturally from the breakdown of organic matter, including plants, animals, and animal waste.

Normal paraffin:

Therefore Normal paraffin is

a type of wax or oil produced in the petrochemical industry, which is

obtained from the distillation of crude oil. This material initially has many impurities and is

yellow to brown in color. But by performing purification, its

purity is

increased and it becomes white or colorless. Paraffin in various industries such as

textile, rubber making, pesticides, defense industries,

battery making, insulation, cable making, paint and resin, glue, wax and polish,

cosmetics and hygiene, wood and paper packaging,

matchmaking, Candle making and lubricants are

also used.

nitric acid:

This substance is a strong acid with oxidizing properties and is the main reagent for nitrate (like adding a nitro group to an organic molecule). Nitric acid is soluble in water and is also a strong oxidizer that is very corrosive and toxic. This substance reacts with metals, oxides and hydroxides and forms nitrate salts.

Monoathanolamin:

Amino alcohol has been

produced industrially since 1930. However, their large-scale production began only after 1945, when the older chlorohydrin process was

replaced by ethylene oxide and propylene oxide olefination processes. In industry, amino alcohols are

usually defined as

alkanolamines. Ethanolamines (aminoethanols) and propanolamines (aminopropanols) are important compounds of this group. Both mentioned substances are

widely used in the production of surfactant powders in gas purification.

Ethylene glycol (ethane diol):

Ethylene glycol (ethane diol) or ethyl glycol or mono ethylene glycol is an organic compound with 2 formulas (C2H6O2 and CH2OH). It is

basically used for two purposes. This material is

used as a raw material in the production of polyester fibers and is

also used for the formulation of antifreeze products. Ethylene glycol is a thick (viscous) liquid, colorless, odorless, and sweet in taste.

Ethylene glycol is

very toxic and especially pets are

exposed to poisoning caused by leakage of this liquid from the devices they use.

Paraoxylene (p-xylene):

Paraxylene, aromatic hydrocarbon, all the products in which there is

a benzene ring are

called aromatic substances. Most of these substances include benzene, toluene, and xylenes (orthoxylene, metaxylene, and paraxylene), which have wide applications. Paraxylene is

one of the isomers of xylene in which two methyl branches are

placed across each other and on atoms number 1 and 4. Therefore Paraxylene is

widely used in the production of terephthalic acid for polyester. The location of two methyl branches across each other is on the benzene ring.

company Services:

Export:

In general, export means that a product is

transferred from one country to another. Perhaps a few years ago, the concept of export did not have much place in the economy, but today there is talk about the export power of countries, which means that any country that exports more It has more economic power

Importation

brokerage

transit

about us

What is a trading company?

Therefore A trading company refers to those companies whose main activity and purpose is trade. In conclusion In fact, the activity of these companies is export of goods, import of goods, buying,   selling and all foreign and domestic commercial activities. Therefore

To put it more simply,  a trading company is a commercial business that carries out activities such as import and export of all permitted goods, Similarly buying and selling, distribution and distribution of goods (transportation),  obtaining licenses, consulting, Similarly training and some other things. he is doing it. Therefore

Contact us

After that Hello dear visitors

Therefore You can contact Oskar international trading company in one of the following ways.

Commercial WhatsApp number of the company: +989022311383

Mobile number: +989056675217

Email: info@oskartrading.com

Address: Iran, Shiraz, Persian Gulf Complex, plate 4472