Slack wax: a substance composed of wax and oil, which is a byproduct of motor oil production refineries and is the raw material for paraffin production. This product is obtained in the process of producing motor oils from a substance called Lubcat, which is a waste oil. In the process of paraffin production, slack wax is introduced into the production system as a feed, and after performing processes such as deoiling and decolorization, it becomes the final product, paraffin wax. The oil obtained in this process becomes another product called Fots Oil or Residue Wax, which has many industrial uses.

Petroleum waxes can be divided into three categories according to the raw materials from which they are obtained.

A: Paraffin waxes

This type of wax is made of raw materials with ………….

It has a low boiling point and most of its constituents are composed of normal paraffinic hydrocarbons. Most of the branched hydrocarbons (if any) are isoparaffins. The hydrocarbons that make up wax have 20 to 40 carbon molecules and their molecular weight varies between 280 and 560. Also, it is solid at normal temperature and its viscosity is about 35-45 SUS (at 100 degrees Celsius) and its crystals are needle or plate.

B: Microcrystalline waxes

Microcrystalline waxes are obtained from waxing heavy raw materials (raw materials with high boiling point). Its crystals are finer than paraffin types and its molecular weight is around 450-800 and the number of carbon compounds that make it up is between 32-57.

Microcrystal waxes are better combined with sulfuric acid, nitric acid and sulfonic acid compared to paraffins, and the reason for this combination is the presence of hydrogen on the third type of carbon. Oxidized types of these waxes are used in the production industry of floor wax (POLISH). They are also used as suspension pigments in paint production.

A: Petrolatum

If waxing is done on the remaining materials of distillation, the resulting wax is called petrolatum. Its crystals are smaller than the previous two types and they keep some oil in them, so they usually have a gelatinous state.

Its molecular mass is between 560-980 and its melting point is between 55-85 degrees Celsius. When they want to spread petrolatum without using solvent and heat, petrolatum emulsified in water is used. For this purpose, a mixture of wax melted in hot water should be prepared using an emulsifier such as tetraethanolamine.

Slack wax

The raw material for the production of solid paraffin is slack wax, and solid paraffin is usually divided into the following types according to the oil content:

Solid paraffin

Crystal and micro crystal

Solid paraffin

0.5 to 1% fat

Solid paraffin

1 to 3 percent fat

Solid paraffin

3 to 5 percent fat

Solid paraffin

5 to 7 percent fat

And …

The whiter and clearer the color of the paraffin, the higher the quality. The main use of this product is in candle making, food, leather and other industries.

Solid paraffin is widely exported to Central Asian and African countries.

Slackwax is one of crude oil derivatives whose impurity level (the amount of oil in it) varies between 5 and 30%. The melting point of slack wax varies from 50 to 55 degrees Celsius and is used in many cases in the industry. It is used in lubricants, candle production, as a waterproofing agent for synthetic wood (matchmaking and fireplace industries), etc.

Slack wax is the product of raffinate refining in the waxing unit with toluene-methyl ethyl ketone solvent. Due to the high precision in the waxing process and the use of special technology, it is a collection of normal, chain and isoparaffin linear hydrocarbons, the percentage of oil in it has been reduced to 15% and its color has become very bright. Slack wax is obtained as a side product in the base oil refining process, which is urgently needed as a raw material for paraffin producers.

Application:

candle making
Wax emulsions
Textile Industry
Insulation and glass wool
Production of paraffin wax

Specification

Large amounts of paraffin.
High flash point.
Bright color and non-staining properties.

Oskar Trading Company is a supplier of the following products:

Oil products:

LPG:

Liquefied petroleum gas or LPG (in English: Liquefied Petroleum Gas) refers to two hydrocarbon gases, butane and propane,

or their combination,

which are

kept in a liquid state. Usually, small amounts of compounds such as propylene and butylene are also present in liquid gas. LPG is

mostly used for heating applications and as fuel for vehicles. It is

also used in the manufacture of sprinklers and as a cooling gas in cooling devices such as refrigerators and freezers.

sulfur:

(in English: Sulfur) is

placed in the periodic table on the left side of chlorine, below oxygen and above selenium, and its chemical symbol is

S and its atomic number is 16. The discovery of this element goes back to prehistoric times. Therefore

It is a smelly, foul-tasting and polyvalent non-metal that is mostly available in the form of yellow crystals. Flea killer is useful for fertilizer and agriculture. This element is

primarily used in fertilizers; But it is

also widely used in gunpowder, softeners, matches and insecticides.

oil:

What is engine oil?

They are complex compounds consisting of base oil and various additives. Every car needs the right engine oil to function properly. In fact, engine oil is an essential element for the car engine. As the age of the engine increases, the importance of using high-quality oil is

felt more and more.

What is base oil?

It is

called an oil and is

considered as a base for lubricants. After adding additives to the base oil, the final lubricant is

obtained. Base oils are the most important components of lubricants in terms of volume, and in terms of weight, on average, they make up more than 95% of the formulation of a lubricant.

Light oil

Petrochemical:

Methanol:

Methanol or methyl alcohol, which is the simplest type of alcohol, is

known by the chemical formula CH3OH. Therefore

It is a light, volatile, colorless and flammable liquid. This substance is very toxic so that swallowing or inhaling it can cause blindness or death. Methanol is

used in the production of many final products such as solvents, paints, plastics and antifreeze.

Also, methanol is

used in a limited way as fuel in engines with internal combustion system. It should be

mentioned that most of the methanol produced in the world is

used to produce acetic acid and MTBE formaldehydes.

urea:

It is an organic compound with the chemical formula 2CO(NH2). This compound is colorless, odorless and relatively non-toxic and has high solubility in water. Urea is

widely used in chemical fertilizers as a rich and suitable source of nitrogen.

In fact, more than 90% of urea production in the world contains nitrogen for use as chemical fertilizers. Therefore
In general applications, urea has the highest amount of nitrogen among all solid nitrogenous fertilizers. Therefore

Based on this, urea brings the lowest transportation costs per unit of nitrogen feed.

Ammonia:

Ammonia, as an inorganic and colorless substance, is very irritating with a pungent and suffocating smell, and its usual form is liquid.

The production of various chemicals such as nitric and their use in various industries is one of its applications.

It is

also important to know that ammonia is

part of the nitrogen cycle and is

produced by bacterial processes in the soil. Ammonia is

also produced naturally from the breakdown of organic matter, including plants, animals, and animal waste.

Normal paraffin:

Therefore Normal paraffin is

a type of wax or oil produced in the petrochemical industry, which is

obtained from the distillation of crude oil. This material initially has many impurities and is

yellow to brown in color. But by performing purification, its

purity is

increased and it becomes white or colorless. Paraffin in various industries such as

textile, rubber making, pesticides, defense industries,

battery making, insulation, cable making, paint and resin, glue, wax and polish,

cosmetics and hygiene, wood and paper packaging,

matchmaking, Candle making and lubricants are

also used.

nitric acid:

This substance is a strong acid with oxidizing properties and is the main reagent for nitrate (like adding a nitro group to an organic molecule). Nitric acid is soluble in water and is also a strong oxidizer that is very corrosive and toxic. This substance reacts with metals, oxides and hydroxides and forms nitrate salts.

Monoathanolamin:

Amino alcohol has been

produced industrially since 1930. However, their large-scale production began only after 1945, when the older chlorohydrin process was

replaced by ethylene oxide and propylene oxide olefination processes. In industry, amino alcohols are

usually defined as

alkanolamines. Ethanolamines (aminoethanols) and propanolamines (aminopropanols) are important compounds of this group. Both mentioned substances are

widely used in the production of surfactant powders in gas purification.

Ethylene glycol (ethane diol):

Ethylene glycol (ethane diol) or ethyl glycol or mono ethylene glycol is an organic compound with 2 formulas (C2H6O2 and CH2OH). It is

basically used for two purposes. This material is

used as a raw material in the production of polyester fibers and is

also used for the formulation of antifreeze products. Ethylene glycol is a thick (viscous) liquid, colorless, odorless, and sweet in taste.

Ethylene glycol is

very toxic and especially pets are

exposed to poisoning caused by leakage of this liquid from the devices they use.

Paraoxylene (p-xylene):

Paraxylene, aromatic hydrocarbon, all the products in which there is

a benzene ring are

called aromatic substances. Most of these substances include benzene, toluene, and xylenes (orthoxylene, metaxylene, and paraxylene), which have wide applications. Paraxylene is

one of the isomers of xylene in which two methyl branches are

placed across each other and on atoms number 1 and 4. Therefore Paraxylene is

widely used in the production of terephthalic acid for polyester. The location of two methyl branches across each other is on the benzene ring.

company Services:

Export:

In general, export means that a product is

transferred from one country to another. Perhaps a few years ago, the concept of export did not have much place in the economy, but today there is talk about the export power of countries, which means that any country that exports more It has more economic power

Importation

brokerage

transit

about us

What is a trading company?

Therefore A trading company refers to those companies whose main activity and purpose is trade. In conclusion In fact, the activity of these companies is export of goods, import of goods, buying,   selling and all foreign and domestic commercial activities. Therefore

To put it more simply,  a trading company is a commercial business that carries out activities such as import and export of all permitted goods, Similarly buying and selling, distribution and distribution of goods (transportation),  obtaining licenses, consulting, Similarly training and some other things. he is doing it. Therefore

Contact us

After that Hello dear visitors

Therefore You can contact Oskar international trading company in one of the following ways.

Commercial WhatsApp number of the company: +989022311383

Mobile number: +989056675217

Email: info@oskartrading.com

Address: Iran, Shiraz, Persian Gulf Complex, plate 4472